In fact, there are so many variants available that it can be difficult to choose.
There are a few things to consider when opting for a custom profile. Firstly, because your profile is unique, we will need to build the tooling necessary to machine your cladding. Secondly, the lead time for a custom profile can be up to five working days longer than one of our standard profiles. This is not only because we need to build it, but also because you will need to check it prior to us machining your entire order.
Include your contact details and an overview of your requirements to get started.
Durability is a measurement of how long specific species of timber would last if a 50mm x 50mm cross section was left in the ground unprotected. An untreated Oak beam, which is classed as 'durable’, for example, will last 15-25 years depending on environmental conditions. The following scale of durability was outlined by TRADA, the Timber Research And Development Association.
Durability | Class designation | Average service life |
1 | Very durable | More than 25 years |
2 | Durable | 15-25 years |
3 | Moderately durable | 10-15 years |
4 | Slightly durable | 5-10 years |
5 | Not durable | Less than 5 years |
It's worth noting that the width of your cladding will impact the price. Narrow widths result in more waste and additional workmanship so will be slightly more expensive per metre.
We aim to deliver at least 80% of boards at the lengths you have requested. The remainder will be mixed lengths – some longer and some shorter. A request for a high proportion of longer lengths will have a higher cost per metre because of restricted supply. A mixed length order will be the cheapest because of the ease of sourcing.
To keep delivery costs low we conform to standard UK pallet sizes.
Linear metres calculates the total metre run needed for a specific board width to cover a known square meterage. If you are not 100% certain of your calculations we suggest you include wastage at either 5 or 10%.
0% means you plan on having no waste and we will deliver precisely the linear or square meters you require. 5 or 10% wastage gives you a little leeway when trimming your cladding.
If you are unsure of the exact amount of linear or square metres you require we strongly recommend you add a percentage to take account of any 'wastage', otherwise you may not be getting an accurate representation of your costs.